Info about d800 | LineageOS Wiki

Note: This page is auto-generated for the LG G2 (AT&T), based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the LG G2 (AT&T)

Get the builds here

Installation

How to install LineageOS on the LG G2 (AT&T)

Build guide

How to build LineageOS for the LG G2 (AT&T)

Special boot modes

Recovery: With the device powered off, hold Volume Down + Power. When the LG logo appears, release both buttons and then hold them again. Then press Power three times.
Download: With the device powered off, hold Volume Up and connect the USB cable.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

LG G2 (AT&T) (d800)

Released	October 12, 2013
Carrier	AT&T
Specifications
SoC	Qualcomm MSM8974 Snapdragon 800
RAM	2 GB
CPU	Quad-core Krait 400 2.26 GHz
Architecture	arm
GPU	Adreno 330
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 850 1900 2100 MHz HSDPA 4G bands: 1(2100), 2(1900), 4(1700/2100), 5(850), 17(700)
Storage	16/32 GB
Screen	1920x1080 (424 PPI) IPS LCD
Bluetooth	4.0 + LE with A2DP + aptX
Wi-Fi	802.11 a/b/g/n/ac, Dual-band, Wi-Fi Direct, DLNA, Hotspot
Peripherals	Accelerometer Gyroscope Proximity sensor Compass GPS NFC
Cameras	2 13 MP, LED flash 2.1 MP, No flash
Dimensions	138.5 mm (5.45 in) (h) 70.9 mm (2.79 in) (w) 8.9 mm (0.35 in) (d)
Battery	Non-removable Li-Po 3000 mAh
LineageOS info
Maintainers	Kapricornus
Supported versions	14.1