Info about ham | LineageOS Wiki

Note: This page is auto-generated for the ZUK Z1, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the ZUK Z1

Get the builds here

Installation

How to install LineageOS on the ZUK Z1

Build guide

How to build LineageOS for the ZUK Z1

Special boot modes

Recovery: With the device powered off, hold Volume Down + Volume Up + Power.
Download: With the device powered off, hold Volume Down + Volume Up and connect the USB cable.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

ZUK Z1 (ham)

Released	November 14, 2015
Specifications
SoC	Qualcomm MSM8974AC Snapdragon 801
RAM	3 GB
CPU	Quad-core Krait 400 2.5 GHz
Architecture	arm
GPU	Adreno 330
Network	2G bands: 850 900 1800 1900 MHz GSM, 800 MHz CDMA 3G bands: 850 900 1900 2100 MHz HSDPA 4G bands: 1(2100) 3(1800) 7(2600) 38(2600) 39(1900) 40(2300) 41(2500) LTE
Storage	64 GB
SD card	none
Screen	1920x1080 (401 PPI) JDI IPS
Bluetooth	4.1
Wi-Fi	802.11 a/b/g/n/ac, Dual-band, Hotspot
Peripherals	Fingerprint reader GPS Accelerometer Gyroscope Compass Light sensor Proximity sensor
Cameras	2 13 MP F/2.2, Dual LED flash 8 MP, No flash
Dimensions	155.7 mm (6.13 in) (h) 77.3 mm (3.04 in) (w) 8.9 mm (0.35 in) (d)
Battery	Non-removable Li-Po 4100 mAh
LineageOS info
Maintainers	ashwinr64 raymanfx shenki
Supported versions	14.1