Info about jag3gds | LineageOS Wiki

Note: This page is auto-generated for the LG G3 S, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the LG G3 S

Get the builds here

Installation

How to install LineageOS on the LG G3 S

Build guide

How to build LineageOS for the LG G3 S

Special boot modes

Recovery: With the device powered off, hold Volume Down + Power.
Download: With the device powered off, hold Volume Up and connect the USB cable.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

LG G3 S (jag3gds)

Released	September 2014
Specifications
SoC	Qualcomm MSM8926 Snapdragon 400
RAM	1 GB
CPU	Quad-core Cortex-A7 1.2 GHz
Architecture	arm
GPU	Adreno 305
Network	2G bands: 900 1800 1900 MHz GSM 3G bands: 900 2100 MHz HSDPA
Storage	8 GB
SD card	up to 64 GB
Screen	720x1280 (~294 PPI) IPS LCD
Bluetooth	4.0
Wi-Fi	802.11 b/g/n, Wi-Fi Direct, DLNA, Hotspot
Peripherals	GPS Accelerometer Compass Proximity sensor FM radio
Cameras	2 8 MP, LED flash 1.3 MP, No flash
Dimensions	137.7 mm (5.42 in) (h) 69.6 mm (2.74 in) (w) 10.3 mm (0.41 in) (d)
Battery	Removable Li-Ion 2540 mAh
LineageOS info
Maintainers	vm03 quarx2k nikitaproandroid mobiusm
Supported versions	14.1