Info about jagnm | LineageOS Wiki

Note: This page is auto-generated for the LG G3 Beat, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the LG G3 Beat

Get the builds here

Installation

How to install LineageOS on the LG G3 Beat

Build guide

How to build LineageOS for the LG G3 Beat

Special boot modes

Recovery: With the device powered off, hold Volume Down + Power.
Download: With the device powered off, hold Volume Up and connect the USB cable.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

LG G3 Beat (jagnm)

Released	September 2014
Specifications
SoC	Qualcomm MSM8926 Snapdragon 400
RAM	1 GB
CPU	Quad-core Cortex-A7 1.2 GHz
Architecture	arm
GPU	Adreno 305
Network	2G bands: 900 1800 1900 MHz GSM 3G bands: 900 2100 MHz HSDPA 4G bands: 1(2100) 3(1800) 7(2600) 8(900) 20(800) LTE
Storage	8 GB
SD card	up to 64 GB
Screen	720x1280 (~294 PPI) IPS LCD
Bluetooth	4.0
Wi-Fi	802.11 b/g/n, Wi-Fi Direct, DLNA, Hotspot
Peripherals	NFC GPS Accelerometer Compass Proximity sensor FM radio
Cameras	2 8 MP, LED flash 1.3 MP, No flash
Dimensions	137.7 mm (5.42 in) (h) 69.6 mm (2.74 in) (w) 10.3 mm (0.41 in) (d)
Battery	Removable Li-Ion 2540 mAh
LineageOS info
Maintainers	vm03 quarx2k nikitaproandroid mobiusm
Supported versions	14.1