Info about kccat6 | LineageOS Wiki

Note: This page is auto-generated for the Samsung Galaxy S5 Plus, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Samsung Galaxy S5 Plus

Get the builds here

Installation

How to install LineageOS on the Samsung Galaxy S5 Plus

Build guide

How to build LineageOS for the Samsung Galaxy S5 Plus

Special boot modes

Recovery: With the device powered off, hold Volume Up + Home + Power. When the blue text appears, release the buttons.
Download: With the device powered off, hold Volume Down + Home + Power. In order to exit download mode and reboot, hold Volume Down + Power for about 7 seconds.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Samsung Galaxy S5 Plus (kccat6)

Released	September 21, 2014
Specifications
SoC	Qualcomm APQ8084 Snapdragon 805
RAM	2 GB
CPU	Quad-core Krait 450 2.5 GHz
Architecture	arm
GPU	Adreno 420
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 850 900 1900 2100 MHz HSDPA 4G bands: 1(2100) 2(1900) 3(1800) 5(850) 7(2600) 8(900) 20(800)
Storage	16 GB
SD card	up to 128 GB
Screen	1920x1080 (432 PPI) Full HD Super AMOLED
Bluetooth	4.0 + LE
Wi-Fi	802.11 a/b/g/n/ac
Peripherals	Fingerprint reader Heart rate sensor Motion Coprocessor Accelerometer Gesture sensor Gyroscope Proximity sensor Compass Barometer Hall effect sensor RGB ambient light Infrared sensor
Cameras	2 16 MP, LED flash 2 MP, No flash
Battery	Removable Li-Ion 2800 mAh
LineageOS info
Maintainers	cvxda
Supported models	SM-G901F
Supported versions	14.1 15.1