Info about lentislte | LineageOS Wiki

Note: This page is auto-generated for the Samsung Galaxy S5 LTE-A, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Samsung Galaxy S5 LTE-A

Get the builds here

Installation

How to install LineageOS on the Samsung Galaxy S5 LTE-A

Build guide

How to build LineageOS for the Samsung Galaxy S5 LTE-A

Special boot modes

Recovery: With the device powered off, hold Volume Up + Home + Power. When the blue text appears, release the buttons.
Download: With the device powered off, hold Volume Down + Home + Power. In order to exit download mode and reboot, hold Volume Down + Power for about 7 seconds.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Samsung Galaxy S5 LTE-A (lentislte)

Released	August 15, 2014
Specifications
SoC	Qualcomm APQ8084 Snapdragon 805
RAM	3 GB
CPU	Quad-core Krait 450 2.5 GHz
Architecture	arm
GPU	Adreno 420
Network	2G bands: 900 1800 1900 MHz GSM 3G bands: 850 1900 2100 MHz HSDPA 4G bands: 1(2100) 3(1800) 5(850) 7(2600) 17(700)
Storage	32 GB
SD card	up to 128 GB
Screen	2560x1440 (560 PPI) 2K Super AMOLED
Bluetooth	4.0 + LE
Wi-Fi	802.11 a/b/g/n/ac
Peripherals	Fingerprint reader Heart rate sensor Motion Coprocessor Accelerometer Gesture sensor Gyroscope Proximity sensor Compass Barometer Hall effect sensor RGB ambient light IR blaster
Cameras	2 16 MP, LED flash 2 MP, No flash
Battery	Removable Li-Ion 2800 mAh
LineageOS info
Maintainers	cvxda
Supported models	SM-G906S SM-G906K SM-G906L
Supported versions	14.1 15.1