Info about mido | LineageOS Wiki

Note: This page is auto-generated for the Xiaomi Redmi Note 4, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Xiaomi Redmi Note 4

Get the builds here

Installation

How to install LineageOS on the Xiaomi Redmi Note 4

Build guide

How to build LineageOS for the Xiaomi Redmi Note 4

Special boot modes

Recovery: With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Download: With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Xiaomi Redmi Note 4 (mido)

Released	February 2017
Specifications
SoC	Qualcomm MSM8953 Snapdragon 625
RAM	2/3/4 GB
CPU	Octa-core Cortex-A53 2.0 GHz
Architecture	arm64
GPU	Adreno 506
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 850 900 1900 2100 MHz HSDPA 4G bands: 1(2100) 3(1800) 4(1700/2100) 5(850) 7(2600) 8(900) 20(800) 38(2600) 40(2300), 3(1800) 5(850) 40(2300) (India)
Storage	32/64 GB
SD card	up to 256 GB (hybrid SIM slot)
Screen	1080x1920 (403 PPI) IPS LCD
Bluetooth	4.1 with A2DP
Wi-Fi	802.11 a/b/g/n/ac
Peripherals	Fingerprint reader Accelerometer Gyroscope Proximity sensor Compass GPS Infrared sensor FM radio
Cameras	2 13 MP, LED (dual-tone) flash 5 MP, No flash
Dimensions	151 mm (5.94 in) (h) 76 mm (2.99 in) (w) 8.5 mm (0.35 in) (d)
Battery	Non-removable Li-Po 4100 mAh
LineageOS info
Maintainers	TheScarastic
Supported versions	14.1 15.1