Info about natrium | LineageOS Wiki

Note: This page is auto-generated for the Xiaomi Mi 5s Plus, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Xiaomi Mi 5s Plus

Get the builds here

Installation

How to install LineageOS on the Xiaomi Mi 5s Plus

Build guide

How to build LineageOS for the Xiaomi Mi 5s Plus

Special boot modes

Recovery: With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Download: With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Xiaomi Mi 5s Plus (natrium)

Released	November 2016
Specifications
SoC	Qualcomm MSM8996 Pro Snapdragon 821
RAM	4/6 GB LPDDR4
CPU	Quad-core Kryo 2 x 2.35 GHz + 2 x 2.19 GHz
Architecture	arm64
GPU	Adreno 530
Network	2G bands: 850 900 1800 1900 MHz GSM, 800 MHz CDMA 3G bands: 850 900 1800 1900 MHz HSPA, 1900 2000 MHz TD-CDMA 4G bands: 850(B5) 1800(B3) 2100(B1) 2600(B7) MHz FDD-LTE, 1900(B39) 2300(B40) 2500(B41) 2600(B38) MHz TDD-LTE
Storage	64/128 GB UFS2.0
Screen	1080x1920 (386 PPI) IPS LCD
Bluetooth	4.2 with A2DP + aptX
Wi-Fi	802.11 a/b/g/n/ac, Dual-band, Wi-Fi Direct, Wi-Fi Display, DLNA, Hotspot
Peripherals	Dual SIM Fingerprint reader Accelerometer Gyroscope Light sensor Proximity sensor Compass NFC IR blaster GPS
Cameras	3 16 MP, Dual LED (dual tone) flash Monochromatic 16 MP, Dual LED (dual tone) flash 4 MP, No flash
Dimensions	154.6 mm (6.09 in) (h) 77.7 mm (3.06 in) (w) 8 mm (0.31 in) (d)
Battery	Non-removable Li-Po 3800 mAh
LineageOS info
Maintainers	LuK1337 luca020400
Supported versions	14.1 15.1