Info about paella | LineageOS Wiki

Note: This page is auto-generated for the BQ Aquaris X5, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the BQ Aquaris X5

Get the builds here

Installation

How to install LineageOS on the BQ Aquaris X5

Build guide

How to build LineageOS for the BQ Aquaris X5

Special boot modes

Recovery: With the device powered off, hold Volume Up + Power.
Download: With the device powered off, hold Volume Down + Power.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

BQ Aquaris X5 (paella)

Released	2015
Specifications
SoC	Qualcomm MSM8916T Snapdragon 412
RAM	2/3 GB
CPU	Quad-core Cortex-A53 1.4 GHz
Architecture	arm
GPU	Adreno 306
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 900 2100 MHz HSDPA 4G bands: 800 1800 2100 2600 MHz LTE
Storage	16/32 GB
SD card	up to 32 GB
Screen	720x1280 (~294 PPI) IPS LCD capacitive touchscreen, 16M colors
Bluetooth	4.0
Wi-Fi	802.11 b/g/n, Hotspot
Peripherals	Dual SIM Accelerometer Gyroscope Light sensor Proximity sensor Compass Hall effect sensor GPS FM radio USB OTG
Cameras	2 13 MP, Dual LED flash 5 MP, LED flash
Dimensions	144.4 mm (5.69 in) (h) 70.5 mm (2.78 in) (w) 7.5 mm (0.3 in) (d)
Battery	Non-removable Li-Po 2900 mAh
LineageOS info
Maintainers	brinlyau cmorlok eloimuns Kra1o5 stucki Team aquaris-dev
Supported versions	13.0 14.1