Info about shieldtablet | LineageOS Wiki

Note: This page is auto-generated for the Nvidia Shield Tablet, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Nvidia Shield Tablet

Get the builds here

Installation

How to install LineageOS on the Nvidia Shield Tablet

Build guide

How to build LineageOS for the Nvidia Shield Tablet

Special boot modes

Recovery: With the device powered off, hold Volume Down and tap Power, then release once menu is displayed. Tap Volume Down until recovery is selected. Press Power to select.
Download: With the device powered off, hold Volume Down and tap Power, then release once menu is displayed.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Nvidia Shield Tablet (shieldtablet)

Released	August 29, 2014
Carrier	AT&T, T-Mobile
Specifications
SoC	Nvidia Tegra K1 (T124)
RAM	2 GB
CPU	Quad-core Cortex-A15 2.2 GHz
Architecture	arm
GPU	GK20A (Kepler)
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 850 1700 1900 2100 MHz HSDPA (North America), 850 900 1900 2100 HSDPA (International, depending on model) 4G bands: 2(1900) 4(1700/2100) 5(850) 7(2600) 17(700) (North America), 1(2100) 3(1800) 7(2600) 20(800) (International, depending on model)
Storage	16/32 GB
SD card	up to 128 GB
Screen	1920x1200 (294 PPI) IPS Retinal LCD
Bluetooth	4.0 + LE
Wi-Fi	802.11n 2x2 Mimo 2.4 GHz and 5 GHz
Cameras	2 5 MP, No flash 5 MP, No flash
Battery	Non-removable 5197 mAh
LineageOS info
Maintainers	webgeek1234
Supported versions	13.0 14.1