Info about tenshi | LineageOS Wiki

Note: This page is auto-generated for the BQ Aquaris U Plus, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the BQ Aquaris U Plus

Get the builds here

Installation

How to install LineageOS on the BQ Aquaris U Plus

Build guide

How to build LineageOS for the BQ Aquaris U Plus

Special boot modes

Recovery: With the device powered off, hold Volume Up + Power.
Download: With the device powered off, hold Volume Down + Power.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

BQ Aquaris U Plus (tenshi)

Released	2016
Specifications
SoC	Qualcomm MSM8937 Snapdragon 430
RAM	2/3 GB
CPU	Octa-core Cortex-A53 1.4 GHz
Architecture	arm
GPU	Adreno 505
Network	2G bands: 850 900 1800 1900 MHz GSM 3G bands: 900 2100 MHz HSDPA 4G bands: 800 1800 2100 2600 MHz LTE
Storage	16/32 GB
SD card	up to 32 GB
Screen	1280x720 (~294 PPI) IPS LCD capacitive touchscreen, 16M colors
Bluetooth	4.0
Wi-Fi	802.11 b/g/n, Hotspot
Peripherals	Dual SIM Accelerometer Gyroscope Light sensor Proximity sensor Compass Hall effect sensor GPS FM radio USB OTG
Cameras	2 16 MP, Dual LED flash 5 MP, No flash
Dimensions	143 mm (5.64 in) (h) 72.2 mm (2.84 in) (w) 8.7 mm (0.34 in) (d)
Battery	Non-removable Li-Po 3050 mAh
LineageOS info
Maintainers	brinlyau eloimuns Kra1o5 Team aquaris-dev
Supported versions	14.1